Entries by Student

write my assignment 7381

4. You have been asked to estimate the cost of 100 prefabricated structures to be sold to a local school district. Each structure provides 1,000 square feet of floor space, with 8-feet ceilings. In 1999, you produced 70 similar structures consisting of the same materials and having the same ceiling height, but each provided only 800 square feet of floor space. The material cost for each structure as $25,000 in 1999, and cost capacity factor is 0.65. The cost index values for 1999 and 2006 are 200 and 289, respectively. The estimated manufacturing cost for the first 1,000-square-foot structure is $12,000. Assume a learning curve of 88% and use the cost of 50th structure as your standard time for estimating manufacturing cost.

Estimate the total material cost and the total manufacturing cost for the prefabricated structures.

  answer with detailed information please.

 

"Not answered?"


Get the Answer

write my assignment 20093

Need help with my writing homework on Company Sustainable Development. Write a 4000 word paper answering; The sustainable business operations have greatly benefited the TMC to improve its competitive edge and strengthen its financial position. Toyota has been successful in making their customers aware of the company’s environmental sustainability efforts. The organization increasingly relies on sustainability reports and social networking sites to communicate its sustainability initiatives to the company stakeholders.

The emergence of globalization eliminated international trade barriers and thus intensified the cross-border flow of capital, labor, ideas, and cultures. Evidently, globalization and the resulted fast industrial expansion contributed to various issues like global warming, climate change, water pollution, and increased energy consumption, which in turn pose potential threats to the long-term sustainability of the environment today. There has also been a notable increase in the population growth over the last two decades, and that worsened the condition. Researchers indicate that world’s current non-conventional energy sources will be consumed out if people and organizations continue to consume the energy at the current rate. Therefore, it is necessary to limit the use of conventional energy sources, maintain water quality, and take other environmental actions to meet the needs of future generations. However, companies like Toyota have adopted the concept of sustainable development to drive environment-conscious growth and thereby enjoy wider market acceptance. TMC encourages and establishes innovative technologies to reduce the environmental impacts of its business operations and inspires local communities to support the company’s environmental efforts. In this context, it is relevant to explore how a company can pursue sustainable development in order to contribute to the competitive edge and financial position.

 

"Not answered?"


Get the Answer

write my assignment 11860

3.2 The Webster National Bank is reviewing its service charge and interest-paying policies on checking accounts. The bank has found that the average daily balance on personal checking accounts is $550, with a standard deviation of $150. In addition, the average daily balances have been found to be normally distributed (Gaussian). (a) What percentage of personal checking account customers carry average daily balances in excess of $800? (b) What percentage of the bank’s customers carries average daily balances below of $200? (c) What percentage of the bank’s customers carries average daily balances between $300 and $700? (d) The bank is considering paying interest to customers carrying average daily balances in excess of a certain amount. If the bank does not want to pay interest to more than 5% of its customers, what is the minimum average daily balance it should be willing to pay interest on? question – 2 A company that manufuture tooth paste is suding

The Webster National Bank is reviewing its service charge and interest-payingpolicies on checking accounts. The bank has found that the average daily balance onpersonal checking accounts is $550,…

 

"Not answered?"


Get the Answer

write my assignment 26551

Project Description

The objective of this project is to design, simulate and build a speech filter. The design should operate on less that ±6 Volts DC. Please keep in mind that you should monitor the cost of the design components. Therefore you will need to determine the frequency band of speech and investigate low power options for the design. After reviewing the various tradeoffs which happens after design and simulations, you should then order the parts for the actual design. Your design must include simulations (Matlab, Multisim or other simulation tools) as well as power and frequency analysis. Make sure your input signal has the various frequency ranges that demonstrates that your design works. You must also compare the actual simulation results to the actual results and explain any differences.

Your circuit should address the following:

  1. Demonstrate the speech filter response of the design.
  2. Power analysis of the design
  3. What could you have done differently to make the circuit more efficient whether its cost, performance or simply a different design implementation?

Project Requirements

  • Create a project chair
  • Research low power operational amplifier circuits.
  • Assign task to team members.
  • Simulate and design the circuit.
  • Compare the theoretical simulations to actual circuit design and explain any discrepancies.
  • Create a research project report
  • The report should include
  • Team members and member contributions
  • design analysis
  • issues and concerns
  • cost of your project
  • conclusion
  • Create videos of your project milestones and post it along with any discussion questions for classmates during weeks 4, 5, and 6.
  • Create an oral presentation during week 7 that demonstrates your design

please help me build a circuit with the following parts or build your own circuit in multisim. My email is . I need it by June 2, 2019. Thanks.

Part List

  • R1= 120Kohm
  • R2= 100Kohm
  • R3= 470Kohm
  • R4-7= 8.2Kohm
  • R5= 6.8Kohm
  • R6= 33Kohm
  • R7= 150Kohm
  • R8= 47Kohm
  • C1-2-8= 2.2nF 100V polystyrene
  • C3= 150pF
  • C4-9= 100nF 100V
  • C5-10= 47uF 25V
  • C6= 100nF 100V polystyrene
  • C7= 560pF
  • C11= 150pF
  • C12= 10uF 25V
  • IC1= TL072

All resistors is 1/4W 1-2%

 

"Not answered?"


Get the Answer